Home > Windows System32 > Corrupt Or Missing

Corrupt Or Missing

Contents

Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the steps below will not resolve your issue. Was this page useful? Type exit to reboot the computer. Make sure the line pointing to the operating system and its drive and partition is properly configured in the [boot loader] and [operating systems] section. check over here

When this error occurs your computer displays the error message shown below. Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. Select the operating system you want to fix, and then enter the administrator password. Miscellaneous corruption Before trying any of the below recommendations it's recommend that you load the last known good configuration. over here

Windows System32 Config System Missing Or Corrupt

If after trying all of the above steps you are still encountering the same issue it's likely that Windows is severely corrupted and it is recommended you reinstall Windows. YesNo Feedback E-mail Share Print Search Recently added pages View all recent updates Useful links About Computer Hope Site Map Forum Contact Us How to Help Top 10 pages Follow us Type expand d:\i386\ntoskrnl.ex_ c:\windows\system32 You will then be prompted if you want to overwrite the file type Y and press enter to overwrite the file.

Once at the recovery console type chkdsk /r Once completed type exit and see if issue is resolved. In the Microsoft Windows XP setup menu press the R key to enter the recovery console. When you see this message press any key. How To Repair Corrupted Windows Xp Without Cd Insert the Microsoft Windows XP CD.

When you see this message press any key. Windows System32 Config System Missing Or Corrupt Fix Without Cd Insert the Microsoft Windows XP CD. Finally, if during the Windows installation you encounter errors it's likely that your hard drive is bad.

Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Operating System > Microsoft Windows Help NTOSKRNL.EXE is

Windows NT installed on a partition bigger then 7.8GB If you are running Microsoft Windows NT 4.0 on a partition larger than 7.8GB this issue can occur if the boot files C:\windows\system32\config\system To restore this file follow the steps below. Microsoft Windows NT and Windows 2000 users: To restore the original boot.ini file in Microsoft Windows NT or Windows 2000 you need an ERD and follow the steps below. Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD.

Windows System32 Config System Missing Or Corrupt Fix Without Cd

Additional information Computer hard drive buying tips. http://www.top-password.com/blog/repair-corrupt-or-missing-system-files-in-windows/ In the Microsoft Windows XP setup menu press the R key to enter the recovery console. Windows System32 Config System Missing Or Corrupt Make sure this is not the cause of your error by replacing the keyboard with a different keyboard or just disconnecting the keyboard from the computer. Windows System32 Config System Missing Or Corrupt Fix Windows 7 Corrupted hard drive or severely corrupted Windows Check the hard drive for any errors by running the chkdsk program.

Missing boot.ini file Microsoft Windows XP users: If the boot.ini is severely corrupted or missing a user running Microsoft Windows XP can rebuild the boot.ini to resolve this issue. http://thetechvoice.com/windows-system32/corrupt-or-missing-windows-system32-config.html If your system partition is larger than 7.8GB you need to delete the partition and recreate the partition to 7.8GB or less. Boot the computer with your Windows NT three setup diskettes or the Windows 2000 setup disc. In the setup menu, type R to start the repair. Windows Could Not Start Because The Following File Is Missing Or Corrupt No Cd

Missing or corrupt ntoskrnl.exe file If the ntoskrnl.exe file is corrupt or missing this can also generate the error. This issue often arises after a user has recently added or removed an operating system on the computer or added or removed hard drives in the computer. OS Loader v4.01Disk I/O error status=00000001Windows NT could not start because the below file is missing or corrupt: winnt\system32\Ntoskrnl.exePlease reinstall a copy of the above file. this content If you do not have an ERD you cannot follow these steps.

Additional information about this issue can be found on Microsoft KB Q224526. Windows System32 Config System File Download When prompted for the ERD diskette insert the diskette and inspect the startup environment. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD it is likely the steps below will not resolve your issue.

Select the operating system you want to fix, and then enter the administrator password.

How to rebuild the Windows boot.ini. Additional information and help with the boot.ini. To do this follow the steps below. Windows System32 Config System Windows 7